Products
R & D Unit
Services
Client List
Awards
Gallery
RTI
Enquiry
CareerDownloadNews
Contact Us
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO. 2401 4081
e-mail : webelmedia@gmail.com
Tender Call Notice No. WML:TENDER:009:2011 Date: 07.02.2012
Webel Mediatronics Limited intends to dispose of on as is where is basis one No. 6.2 Metres Parabolic Dish Antenna with C-Band Linear Feed (Dual Port) & with Anchor Bolts with Foundation Templates, as per following specification :-
|
Sl.No. |
Parameters |
Specification |
|
01. |
Antenna Type | Parabolic reflector mesh type |
|
02. |
Size | 6.2 Mtr. Dia |
|
03. |
Gain | Better than 45 dB at 4 GHz |
|
04. |
Polarization | Linear Orthogonal |
|
05. |
G/T | Better than 24 dB /K at 4 GHz |
|
06. |
Mount | Azimuth elevation |
|
07. |
Drive system | Manual. |
|
08. |
Steearability | |
| Azimuth | 180 Deg in x 2 position | |
| Elevation | 5 Deg to 85 Deg. | |
|
09. |
Operating Frequency | 3.7 GHz to 4.2 GHz |
|
10. |
Feed Impedance | 50 Ohms |
|
11. |
Feed VSWR | Better than 1.3:1 |
|
12. |
Pol. Discrimination | 30 dB (Min.) |
|
13. |
Azimuth elevation and polarization offset angles are available to the operator at the base of the antenna. | |
|
14. |
Provision for the fine correction of polarization offset and focal length from the base of the antenna is available. | |
|
15. |
Focus | Prime Focus |
|
16. |
Frequency | C-Band |
|
17. |
Ports | 2 Ports for receiving both linear orthogonal polarization signal. |
|
18. |
Polarization adjustment | Motorized, 5 Deg. To 95 Deg. |
|
19. |
Operating Temperature | 30 Deg. C to 50 Deg. C |
Sealed tenders are invited from interested persons/ parties / agencies within 16.02.2012 after inspection at our office at P-1, Taratala Road, Kolkata – 700 088, if required for assessment, during office hours except Saturday and Sunday. Offers should be inclusive of dismantling of the said PDA from its civil structure, cleaning and make good of the space.
General Manager.
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
NOTICE INVITING TENDER
Ref : WML/NHAI/02/2012 Date: 24.01.2012
Sealed Tender is being invited from the interested parties for the following items attached in Annexure – I & Annexure – II.
1.0 Last date of submission
Sealed offers are to be dropped to tender box located in the 3rd Floor reception of Webel Mediatronics Limited , P-1, Taratala Road, Kolkata – 700 088, latest by 5th of February 2012 at 3.00 p.m.
2.0 Date of Opening
The tender will be opened on 6th of February 2012 at 3.00 P.M.
3.0 Location of site
Lumding PIU in the State of Assam
4.0 Job completion within 60 days from the date of valid job order.
5.0 Payment Terms: 30 days Credit preferred from the date of completion of Job.
6.0 General terms and conditions
6.1 Job should be completed based on the relevant specification of ASEB/LAEDCL
6.2 Quantity may vary.
6.3 The bidder should be ASEB / LAEDCL approved vendors
6.4 The successful bidder shall further stand guarantee for the rated performance of the Job for a period of 24 months from the date of completion.
6.5 The bidder shall quote his offer with all taxes, duties, charges FOR site basis, all inclusive and shall be FIRM.
(Joy Sen)
Asst. Manager (Material)
Ph - 9830385701
Drawal of 33KV – 11KV – LT OH Line with Distribution Transformer against relocation of APDCL owned OH Electrical utility against NHAI’s four lanning programme at the various segments of NH – 54E under Lumding PIU of National Highways Authority of India in the state of Assam under NC Hill Area.
Technical Eligibility Criteria:
Applications are invited from the bonafied, reliable and resourceful Electrical Contractors for carrying out various works pertaining to erection, installation, construction & commissioning of overhead and underground lines upto 33KV line & Sub-station against relocation of overhead electrical utility owned by the electricity authority under four lanning programme of National Highways Authority of India
1] Valid electrical contractor’s license.
2] Copy of appointment letter of the supervisor and joining report addressed to the License Board of State Govt. The electrical contractor / supervisor should have Certificate of competency having minimum requisite parts for the execution of above job.
3] Valid Trade License.
4] Current receipt of Professional Tax.
5] Service Tax Registration certificate.
6] PAN Card.
7] PF Code No. along with copy of PF Registration Certificate.
8] ESI registration along with copy of recent months submitted Bank Challan.
Fulfillment of the above conditions is mandatory in respect of pre-qualification for above tender.
Applicants will have to follow all other existing Govt. Acts, Rules & Regulations and as may be framed in future.
Application completed in all respect printed in letter-head of his concern with full communication address and Telephone No. etc. must be submitted at this office within ……………. Inability to fulfill any of the conditions stated above will lead to cancellation of the application without any further communication. The authority reserves the right to reject any offer and to cancel the tender process at its sole discretion without assigning any reason whatsoever.
BRIEF SCOPE:
· The scope of the tender is to assess and conduct survey for an estimate of the scope of work and cost for dismantling of the overhead activity.
· Installation of material at located segment of NH along with drawal of materials from our designated store at Lumding.
· Monitoring, Co-ordination with NHAI authority for proper co-ordination of utility shifting work in line with the NHAI’s requirement.
· Liasioning with Assam Power Distribution Company Ltd.’s (APDCL) respective division for appraisal of the job under scope of tenderer’s execution in line with NHAI’s requirement.
· Co-ordination with the respective office designated by the respective office of APDCL in regards to the inspection / testing / acceptance of installation for the proposed job to be procured by the tenderer.
· Co-ordination with NHAI’s local office / agency in regards to their requirement for shifting of utility from their impact zone.
· Co-ordination with APDCL’s respective office for survey of proposed line, drawal of proposed new line, handing over – taking over of new line.
· Co-ordination in regards to the availability of shutdown, inspection and dismantling of existing lines, which required to be shifted for road widening programme.
· Co-ordination with APDCL’s designated store in regards to the return of dismantling material from the existing line required to be shifted and obtaining of SRN against delivery of material.
· Detail installation / dismantling schedule is enclosed in the Annexure of this letter.
Extra work if any shall be done at mutually agreed rate on the basis of this offer.
Annexure I
|
Sl. No. |
Description of Work |
Unit |
Quantity |
|
1 |
Supply and erection of Single length Steel tubular pole size given below complete with aligning and keeping in vertical position including Pill digging in all type soil and rock etc. of size 75 cm. x 75 cm. x 1/5th of pole length and providing base padding 150 mm. thick & filling the pit with 1:3:6 cement concrete & muffing the pole upto 400 mm. of block dia 400 mm. above ground level with painting of pole with 2 coats of bitumin paint of portion burried under the ground & 2 coats of red oxide & 2 coats of aluminium paint of portion above ground level including all surveying, labour, material transportaion, incidentals etc. complete in all respect as per specification and direction of Engineer in charge |
|
|
|
|
a] 14.5 Mtr. length [SP-76] |
Nos. |
30 |
|
|
b] 12 Mtr. length [SP-66] |
Nos. |
250 |
|
|
c] 8.5 Mtr. length [Sp-17] |
Nos. |
70 |
|
2 |
Supply & fixing of V cross arms of MS channel with back clamps on poles complete including all necessary nut & bolts with washers, brackets, hardware including all labour, materials, accessories, painting, drawing and direction of Engineer in charge |
|
|
|
|
a] 33KV MS Channel: 100 x 50 x 6 mm. |
Nos. |
150 |
|
|
b] 11KV MS Channel: 75 x 40 x 6 mm. |
Nos. |
50 |
|
3 |
Supply & fixing of Top cross arms including all necessary nut & bolts with washers, brackets including painting, incidentals etc. all complete as per specification, drawing and direction of Engineer in charge |
|
|
|
|
a] 33KV - 100 x 50 x 6 x 300 mm. |
Nos. |
150 |
|
|
b] 11KV - 75 x 40 x 6 x 300 mm. |
Nos. |
50 |
|
|
c] LT - 40 x 40 x 6 x 150 mm. |
Nos. |
70 |
|
4 |
Supply, fittings and fixing of MS Channel / Angle cross arm in SP/DP/TP/FP structures with clamps, nuts & bolts etc. including of hole where necessary as per the direction of Engineer in charge |
|
|
|
|
a] 33KV - 100 x 50 x 6 x 3200 mm. |
Nos. |
418 |
|
|
b] 11KV - 75 x 40 x 6 x 2200 mm. |
Nos. |
42 |
|
5 |
Fitting & fixing of cross bracing with 65 x 65 x 6 mm. MS Angle Iron in DP/TP/FP structure of HT line including supply of MS Angle, nuts & bolts, clamps etc. making holes as per direction of Engineer in charge |
Running meter of MS Angle |
55 |
|
6 |
Supply, fittings & fixing of stay set complete including digging of earth pit of area (0.6 m. x 0.4m.) & depth of 1.4 m. placing the stay rod with plate fiding GI stay wire 7/10 SWG for HT & 7/14 SWG for LT & guy insulator on pole clamp, fiding thimble bow etc. with backfilling by boulder packing as directed by Engineer in charge |
|
|
|
|
a] HT (33KV) |
Set |
96 |
|
|
b] HT (11KV) |
Set |
74 |
|
|
c] LT Stay set |
Set |
35 |
|
7 |
Supply, fittings & fixing of insulators including drilling of holes on cross arm where necessary : |
|
|
|
|
a] 33KV Pin Insulator with pin |
Nos. |
488 |
|
|
b] 33KV Disc insulator with Hardware Fittings (for 3 Disc) |
Set |
720 |
|
|
c] 11KV Pin Insulator with pin |
Nos. |
168 |
|
|
d] 11KV Disc insulator with Hardware fittings |
Set |
96 |
|
|
e] LT pin insulator with pin |
Nos. |
|
|
|
f] LT shackle insulator with Hardware fittings |
Set |
44 |
|
8 |
Supply and stringing of conductors with laying of conductor on ground, lifting on pole, tensioning, binding on insulator, jampering on DP/TP/FP structures including supply and fitting of PG clamp (for HT line)with standard sagging in each and every span as per direction of Engineer in charge |
|
|
|
|
a] 11KV line (per Km. circuit of 3 wire)AAA Weasel conductor |
Km. |
1.440 |
|
|
b] 33KV line (per Km. circuit of 3 wire)AAA Raccoon conductor |
Km. |
3.750 |
|
|
c] LT line (3 phase 4 wire) with AAA squirrel conductor per circuit Km. |
Ckt. Km. |
1.800 |
|
|
d] LT line (1 phase 2 wire) with AAA squirrel conductor per circuit Km. |
Ckt. Km. |
1.800 |
|
9 |
Supply fitting and fixing of guard wire including cross arm, bracing (where applicable) Bracket, Clamp, nuts & Bolts & 8 SWG GI wire as per direction of Engineer in charge |
|
|
|
|
a] 33KV line (Bracket MS Angle: 50 x 50 x 6 x 3500 mm.) |
Mtr. |
6 |
|
|
b] 11KV line (Bracket MS Angle: 50 x 50 x 6 x 2500 mm.) |
Mtr. |
14 |
|
|
c] LT Line (Bracket MS Angle: 40 x 40 x 6 x 800 mm.) |
Mtr. |
0 |
|
10 |
Supply fitting and fixing of GI Barbed wire as anti climbing device (Approx. 2 Kg. per pole)as per direction of Engineer in charge |
Each |
280 |
|
11 |
Supply fitting and fixing of danger plate as per direction of Engineer in charge |
|
|
|
|
a] 33KV |
Nos. |
|
|
|
b] 11KV |
Nos. |
|
|
|
c] LT Line |
Nos. |
|
|
12 |
Earthing by digging as required by buying the CI pipe and surrounding by finely broken coke / charcoal / salt etc. and protecting it with different pole structures in all the line and sub-stations by 6 SWG GI wire including supply of material as per direction of Engineer in charge |
Nos. |
71 |
|
13 |
Clearance of jungle and cutting of tree branches, creeping etc. 3 Mtr. on either sides of alignment parallay as per the direction of Engineer in charge |
Km. |
8.000 |
|
14 |
Supply and erection of Dist. Transformers on Dp stretches including all connection of HV, LV with the lines (complete as directed) and supply of clamps, nut & bolts and including transportation of transformer as per direction of Engineer in charge |
|
|
|
|
a] 100KVA |
Nos. |
2 |
|
|
b] 63KVA |
Nos. |
1 |
|
|
c] 25KVA |
Nos. |
1 |
|
15 |
Supply fitting and fixing of DO (set of three units) on channel cross arm, nuts & bolts clamps including connection with lines and sub-stations including drilling of holes as per the direction of Engineer in charge |
|
|
|
|
a] 33KV |
Set |
|
|
|
b] 11KV |
Set |
4 |
|
16 |
Supply fitting & fixing of LA (sets of 3 wire for transformer protection) on MS channel cross arm including drilling of hole etc. as per direction of Engineer in charge |
|
|
|
|
a] 33KV |
Set |
0 |
|
|
b] 11KV |
Set |
4 |
|
17 |
Supply fitting & fixing of GOAB switch set on channel cross arm, nuts & bolts, clamps including connection with lines and sub-stations including drilling of holes as per the direction of Engineer in charge |
|
|
|
|
a] 33KV |
Set |
|
|
|
b] 11KV |
Set |
4 |
|
18 |
Supply, fitting and fixing of 3 phase rewireable type LT main switch & necessary connection with cables as per direction of Engineer in charge: |
|
|
|
|
a] 200A |
Nos. |
2 |
|
|
b] 100A |
Nos. |
1 |
|
|
c] 63A |
Nos. |
1 |
|
19 |
Supply, fitting and fixing of meter cabinet as per specification including supply of required materials |
Nos. |
4 |
|
20 |
Supply and fitting of CT operated LT static trivector meter 5 Amp. Including supply of LT, CT (set of 3 nos.) alongwith all other materials as per direction of Engineer in charge: |
|
|
|
|
a] With CTR 200/5A |
Nos. |
0 |
|
|
b] With CTR 100/5A |
Nos. |
4 |
|
21 |
Supply of 3 1/2 core XLPE LT cable & connecting with LV side of DTR at one end & LT line on the other through Main switch & machinery cabinet with lugging at cable end including supply of all required materials as per direction of Engineer in charge |
|
|
|
|
a] 120 sq. mm. |
Mtr. |
20 |
|
|
b] 95 sq. mm. |
Mtr. |
10 |
|
|
c] 50 sq. mm. |
Mtr. |
10 |
|
|
|
|
|
Annexure II
|
|
|
||
|
Sl. No. |
Description of Work |
Unit |
BOQ.Qty. |
|
1 |
Release of LA by untieing connection and safe carriage to ASEB/CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
|
|
|
|
a] 33KV |
Set |
0 |
|
|
b] 11KV |
Set |
1 |
|
2 |
Release of DO fuse by untieing connetion and safe carrige to ASEB / CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
|
|
|
|
a] 33KV |
Set |
0 |
|
|
b] 11KV |
Set |
1 |
|
3 |
Release of transformer by untiening connection of both HV & LV sides safe unloading on ground and safe carriage of all materials including cable to ASEB / CAEDCL's godown at Halflong Division as per direction of the Engineer in charge |
|
|
|
|
a] 100KVA |
Nos. |
0 |
|
|
b] 63KVA |
Nos. |
1 |
|
|
c] 25KVA |
Nos. |
1 |
|
|
d] 16KVA |
Nos. |
0 |
|
4 |
Uprooting of CI Earth pipe after untieing connection and carriage with GI Wire etc. to ASEB / CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
Nos. |
6 |
|
5 |
release of conductor from insulator, making roll on ground and safe carriage to ASEB / CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
|
|
|
|
a] 33KV - AAAC Raccoon |
Ckt. Km. |
0.000 |
|
|
b] 33KV - ACSR Raccoon |
Ckt. Km. |
1.200 |
|
|
c] 11KV - ACSR Squirrel |
Ckt. Km. |
0.000 |
|
|
d] 11KV - ACSR Weasel |
Ckt. Km. |
0.750 |
|
|
e] LT - ACSR Squirrel |
Ckt. Km. |
1.125 |
|
|
f] LT - ACSR Weasel |
Ckt. Km. |
0.000 |
|
6 |
Release of Guard line from structure making roll on the ground and carriage to ASEB / CAEDCL's godown at Halflong Division as per the direction of Engineer in charge |
|
|
|
|
a] HT line |
Mtr. |
240 |
|
|
b] LT line |
Mtr. |
0 |
|
7 |
Removing insulators from structure and carriage of same to ASEB / CAEDCL's godown at Halflong Division as per direction of the Engineer in charge |
|
|
|
|
a] Disc insulator with attachment |
Nos. |
52 |
|
|
b] HT Pin insulator with pin |
Nos. |
148 |
|
|
c] LT pin insulator with pin |
Nos. |
22 |
|
|
d] Shackle insulator with straps |
Nos. |
0 |
|
8 |
Dismantling of cross arm from structure including clamps etc. and carriage to ASEB / CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
|
|
|
|
a] MS Channel Cross Arm 3.2 Mtr. length |
Nos. |
18 |
|
|
b] MS Channel Cross Arm 2.2 Mtr. length |
Nos. |
12 |
|
|
c] 11KV T/Y Cross Arm |
Nos. |
8 |
|
|
d] LT Angle Cross Arm |
Nos. |
14 |
|
|
e] HT Guard Bracket |
Nos. |
0 |
|
|
f] LT Guard Bracket |
Nos. |
0 |
|
9 |
Uprooting of Stay Set and carriage to ASEB / CAEDCL's godown at Halflong Division as per direction of Engineer in charge |
|
|
|
|
a] HT line |
Set |
22 |
|
|
b] LT line |
Set |
8 |
|
10 |
Uprooting of pole, stacking of same at site and carriage to ASEB / CAEDCL's godown at Halflong Division as per direction of the Engineer in charge |
|
|
|
|
a] RS Joist |
Nos. |
6 |
|
|
b] Wood Pole |
Nos. |
0 |
|
|
c] 9.75 Mtr. PSC |
Nos. |
0 |
|
|
d] 8.5 Mtr. PSC |
Nos. |
0 |
|
|
e] 7.5 Mtr. PSC |
Nos. |
0 |
|
|
f] 9.75 Mtr. Rail Pole |
Nos. |
120 |
|
|
g] 8.5 Mtr. Rail Pole |
Nos. |
0 |
(Joy Sen)
Asst. Manager (Material)
Ph - 9830385701
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
NOTICE INVITING TENDER
Ref : WML/NHAI/01/2012 Date: 20.01.2012
Sealed Tender is being invited from the interested parties for the following items attached in Annexure - I:
1.0 Last date of submission
Sealed offers are to be dropped to tender box located in the 3rd Floor reception of Webel Mediatronics Limited , P-1, Taratala Road, Kolkata – 700 088, latest by 5th of February 2012 at 3.00 p.m.
2.0 Date of Opening
The tender will be opened on 6th of February 2012 at 3.00 P.M.
3.0 Location of site (delivery place)
Material should be delivered at Lumding PIU in the State of Assam
4.0 Delivery: Within 30 days from the date of valid purchase order.
5.0 Payment Terms : 30 days Credit preferred from the date of supply.
6.0 General terms and conditions
6.1 Material should be supply based on the relevant specification of ASEB/LAEDCL
6.2 Quantity may vary.
6.3 The intending bidder should be ASEB / LAEDCL approved vendors
6.4 The intending bidder shall either be the manufacturer or accredited dealers of the manufacturer. In case of accredited dealer, dealership certificate shall be enclosed with the application requesting permission for issuance of tender document.
6.5 The successful bidder shall have to furnish the certificate for genuineness of the items supplied against the order from the original manufacture.
6.6 The successful bidder shall stand guarantee for the safe and quality supply of the tendered item.
6.7 The successful bidder shall further stand guarantee for the rated performance of the supplied articles for a period of 24 months from the date of supply
6.8 The store shall be supplied for their safe and healthy supply at FOR site basis or as directed by the department.
6.9 The bidder shall quote his offer with all taxes, duties, charges FOR site basis, all inclusive and shall be FIRM.
6.10 On completion of supply & delivery of materials at site or else where successfully, 100% payment shall be made subject to application of SD clause as stated in Sl. No 4.8 above.
7.0 The Tender must be accompanied with the
true copy of Trade License, valid Income Tax PAN
CARD, VAT Clearance Certificate, failing which the tender
will be rejected.
| List of Material to be procured for Lumding Project | |||
| Sl.Nos. | Description Of Items | Unit | Quantity |
| 1 | Steel Tubular Pole: 14.5 Mtr. ( SP - 76 ) | Nos. | 30 |
| 2 | Steel Tubular Pole: 12 Mtr. ( SP - 66 ) | Nos. | 250 |
| 3 | Steel Tubular Pole: 8.5 Mtr. ( SP - 17 ) | Nos. | 70 |
| 4 | 33 KV 'V' Cross Arm 100 X 50 X 6 mm | Nos. | 150 |
| 5 | 33 KV MS Top Adopter | Nos. | 120 |
| 6 | 11 KV M.S. Channel "V" Cross Arm. | Nos. | 50 |
| 7 | 11 KV MS Top Clamp | Nos. | 40 |
| 8 | MS Channel : 100 X 50 X 6 mm | Kg. | 8460 |
| 9 | MS Channel : 75 X 40 X 6 mm | Kg. | 616 |
| 10 | MS Angle : 65 X 65 X 6 mm | Kg. | 3883 |
| 11 | MS Flat : 65 X 6 mm | Kg. | 3645 |
| 12 | 33KV Pin Insulator | Nos. | 488 |
| 13 | 33KV Pin for above | Nos. | 488 |
| 14 | 11KV Pin Insulator | Nos. | 168 |
| 15 | 11KV Pin for above | Nos. | 168 |
| 16 | 11 KV Disc Insulator (B&C) :70 KN | Set | 2160 |
| 17 | Hardware Fittings For 70 KN Disc Insulator | Set. | 720 |
| 18 | 11 KV Disc Insulator (T&C) :45 KN | Nos. | 96 |
| 19 | Hardware Fittings 50 sq. mm. | Set | 96 |
| 20 | HT Stay Set | Set | 170 |
| 21 | LT Stay Set | Set | 35 |
| 22 | HT Guy Insulator | Nos. | 175 |
| 23 | LT Guy Insulator | Nos. | 38 |
| 24 | G.I Stay Wire 7/3.15 mm | Kg. | 2532 |
| 25 | G.I Stay Wire 7/2.5 mm | Kg. | 153 |
| 26 | G.I Wire 5 mm | Kg. | 54 |
| 27 | G.I Wire 4 mm | Kg. | 60 |
| 28 | AAAC Recoon | Km. | 10 |
| 29 | AAAC Weasel | Km. | 4 |
| 30 | AAC Squirel | Km. | 10 |
| 31 | L.T Angle Cross Arm | Nos. | 110 |
| 32 | P.G Clamp 100 sq. mm. For Racoon Cond. | Nos. | 126 |
| 33 | P.G. Clamp 50 sq.mm. ForbWeasel Cond. | Nos. | 60 |
| 34 | 11 KV GOAB Switch. | Nos. | 1 |
| 35 | G.I Turn Buckle | Nos. | 2 |
| 36 | D' Iron Clamp 3" X 3 1/2" | Nos. | 44 |
| 37 | Shackle Insulator 3" X 3 1/2" | Nos. | 44 |
| 38 | Dist. Transformer: 100 KVA. | Nos. | 2 |
| 39 | Dist. Transformer: 63 KVA | Nos. | 1 |
| 40 | Dist. Transformer: 25 KVA. | Nos. | 1 |
| 41 | LT Kiosk | Nos. | 4 |
| 42 | Cut-out - 200 amps | Nos. | 2 |
| 43 | Cut-out - 100 amps | Nos. | 1 |
| 44 | Cut-out - 63 amps | Nos. | 1 |
| 45 | XLPE Cable 3 1/2 core : 120 sq. mm. | Mtrs. | 20 |
| 46 | XLPE Cable 3 1/2 core : 95 sq. mm. | Mtrs. | 10 |
| 47 | XLPE Cable 3 1/2 core : 50 sq. mm. | Mtrs. | 10 |
| 48 | Lightning Arrestor : 11 KV | Nos. | 1 |
| 49 | G.I. Earth Pipe | Nos. | 71 |
| 50 | Pilfer Proof Steel Metering Cabinet Suitable For 100/5 A, CTs. | Nos. | 1 |
(Joy Sen)
Asst. Manager (Material)
Ph - 9830385701
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
REVISION OF TENDER NOTIFICATION
Date: 05.12.2011
Please note that the last date of submission of quotation for our tender no. WML/DEV/11/ 2011 dated 22.11.2011 is being extended up to 9th of December 2011. The tender will be opened on 9th afternoon. Interested parties are requested to submit their sealed quotation by 12 noon.
Dy. General Manager (Dev.)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
NOTICE INVITING TENDER
Ref : WML/DEV/11/ 2011 Date: 22.11.2011
Sealed tenders are being invited from the interested agencies for design, development, fabrication and supply of the items given bellow :
ITEM NO. – 1
1. Lead Screw mechanism for converting rotational movements into a linear movement as per schematic design enclosed. The total displacement required is 100……. mm. The mechanism will use a stepper motor drive.
2. A housing / console for item no. 1 which includes mounting provision for electronic cards and a panel mountable keyboard.
Two such units are to be fabricated initially for a field trial.
However, design technique should evolve a process for development of a probable plastic mould in future.
ITEM NO. – 2
1. Fabrication of Cabinet for 20 & 40 character Braille display as per concept design enclosed.
2. The cabinet will accommodate piezo actuator based standard Braille cells in an array at its top surface so as to enable visually challenged people to read the display with finger touch. In addition to that the top panel will also accommodate a set of eight control keys. Details of Braille cells, accompanying PCBs, Battery, etc. will be provided.
3. Although two prototypes are to be delivered first, the design approach should take care of mould development in turn.
GENERAL TERMS & CONDITION :
1. Tenderers should quote for design charges, raw material cost & fabrication cost (including screen painting etc.) separately.
2. Design charges and fabrication charges may be quoted in terms of man days.
3. Separate quotations are required for both the items.
4. The ultimate decision of assigning the job partiallly / fully to the successful bidder(s) is reserved by Webel Mediatronics Limited.
5. The last date of submitting tender is 30th November, 2011.
6. The developed items will be sole protery of Webel Mediatronics Limited. And no part of the designed should be transferred to anybody with out prior permission from Webel Mediatronics.
7. Complete sealed tender should be dropped into the tender box located at Webel Mediatronics Limited office reception (3rd floor of Webel building) at P – 1, Taratala Road, Kolkata – 700 088.
Dy. General Manager (Dev.)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
REVISION OF TENDER NOTIFICATION
Date: 22.09.2011
Please note that the last date of submission of the tender floated on 17.09.2011 with reference no. WML/DEV/MISC/05/2011 for purchase of SMD Workstation and PCB inspection cum soldering tool is hereby extended upto 26.09.2011. The tender will be opened on 27th October afternoon.
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
NOTICE INVITING TENDER
Ref : WML/CRS/1344/ 2011 Date: 20.09.11
Sealed tenders are being invited from prospective vendors for Setting up of Audio Recording & Transmission Studio in Kolkata.
|
Sl. |
Item Descriptions |
Quantity
|
|
1. |
Studio Room 1 (Acoustic) (12’ 3” x 9’ x 9’)
Scope of work :
- False ceiling - Wall Acoustic - L.F.A. - Polishing Job - Wooden Skirting & Biting made of Teak Wood - Linoleum Flooring - All over painting - Sound Proof Door made of Teak Wood - Double Glass Observation window (5’ x 3’)
Supply of Material for Studio Room 1 (Acoustic)
Labour Charges for Studio Room 1 (Acoustic) |
01 no. |
|
2. |
Studio Room 2 (Acoustic) (9’ x 6’ x 9’)
Scope of work :
- False ceiling - Wall Acoustic - L.F.A. - Polishing Job - Wooden Skirting & Biting made of Teak Wood - Linoleum Flooring - All over painting - Sound Proof Door made of Teak Wood
Supply of Material for Studio Room 2 (Acoustic)
Labour Charges for Studio Room 2 (Acoustic) |
01 no. |
Work completion period : 45 days from the date of release of P.O.
Price should be inclusive of packing & forwarding charges.
Freight charges & applicable Tax & Duties are to be mentioned as extra.
Warranty period should be 12 months from the date of completion of job. In the event of any defect, if arises out of defective raw material, faulty workmanship or otherwise, within the period of warranty the same shall have to be repaired and / or replaced at free of cost.
Sealed offers are to be dropped to tender box located in the 3rd Floor reception of Webel Mediatronics Limited , P-1, Taratala Road, Kolkata – 700 088, latest by 26th of September 2011 at 12 p.m. The tender will be opened on 26th of September 2011 at 3.00 P.M.
Dy. General Manager (Dev.)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
NOTICE INVITING TENDER
Ref : WML/DEV/MISC/05/2011 Date: 17.09.2011
Sealed Tender is being invited from the interested parties for the following items :
1. SMD Work station. :-
a) The station should have temperature controlled soldering facility for population of SMD components.
b) It should be possible to solder the following packages manually:
(i) Passive components : 0805, 0402 & higher industry standard packages.
(ii) IC’s : TSSOP, SOP, TSOP, QFP, QFN, PLCC up to 208 pin.
(iii) Connectors : Varity of SMD connectors up to 1mm pitch.
c) The station should have hot air soldering / de soldering facility as per the industry standards.
2. PCB Inspection cum soldering tool :- The system should essentially have the following options / features
a) A video microscope with amplification capacity from 20x to 100x on 14” monitor.
b) The output of the microscope should be available for display in a PC Monitor (VGA/LCD)
c) It should be possible to store and take printout of the captured video through the microscope.
d) View area : 10 x 10 sq. mm
e) Working distance : 10 mm. Minimum
f) It should be possible to use this tool for soldering work as well.
g) There should be a suitable stand for holding the microscope during soldering.
Sealed offers are to be dropped to tender box located in the 3rd Floor reception of Webel Mediatronics Limited, P-1, Taratala Road, Kolkata – 700 088, latest by 22nd of September. The tender will be opened on 23rd of September at 3.00 P.M.
Dy. General Manager (Dev.)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
Ref.No. : 16.46.05: 1244/11 August 31, 2011
Notice
Notice is hereby given that the following items will be sold on as is where is basis :-
|
Sl. No. |
Items |
Qnty. (Approx.)
|
Location / Lot No. |
|
01. |
Computer Key Board |
10 Nos. |
Lot I
|
|
02. |
Monitor |
01 No. |
|
|
03. |
Power Supply |
03 Nos. |
|
|
04. |
UPS |
03 Nos. |
|
|
05. |
Scanner |
01 No. |
|
|
06. |
Printer |
02 Nos. |
|
|
07. |
Oscilloscope |
01 No. |
|
|
08. |
CD Player Laser Module |
45 Nos. + 01 Lot |
|
|
09. |
Populated & Blank PCB |
01 Lot |
|
|
10. |
Mechanical Cabinet & Hardware |
01 Lot |
|
|
11. |
Wire & Wire with Connectors |
01 Lot |
|
|
12. |
Broken / Damaged equipment parts |
01 Lot |
|
|
13. |
UPS |
10 Nos. |
Lot II |
|
14. |
Printer |
04 Nos. |
|
|
15. |
Mouse |
04 Nos. |
|
|
16. |
Key Board |
06 Nos. |
|
|
17. |
Monitor |
04 Nos. |
|
|
18. |
PC |
01 No. |
|
|
19. |
Scanner |
01 No. |
|
|
20. |
CPU |
01 No. |
|
|
21. |
Spacer |
15 Nos. |
|
|
22. |
Electronic Type Writer |
01 No. |
|
|
23. |
Chair |
23 Nos. |
Lot III |
|
24. |
Table |
13 Nos. |
|
|
25. |
Tube Light Fittings |
32 Nos. |
|
|
26. |
Ceiling Fan |
20 Nos. |
|
|
27. |
Wooden Partitions |
01 Lot |
|
|
28. |
Glass Panes |
01 Lot |
|
|
29. |
Sofa Set |
01 No. |
|
|
30. |
Wooden Stool |
01 No. |
|
|
31. |
UHF Antennas |
01 Lot |
Lot IV
|
.
Interested parties are hereby requested to please inspect physically the above mentioned items between 11.00 hrs and 17.00 hrs on any working day upto 06.09.2011 and drop their bid price under a sealed cover (with above break up of items) into the tender box located at 3rd floor office of the company.
Bid document will be opened on 07.09.2011 at 3.00 P.M. in presence of the bidders and the members of the Scrap Committee of the company.
Selected bidder(s) will be required to pay taxes, if applicable, in addition to the bid price.
The company reserves the right to dispose of above items to the selected bidder(s) either in full or in part against the highest bid price.
For Webel Mediatronics Ltd.
( A. Bandyopadhyay )
General Manager
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700 088, WEST BENGAL
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
TENDER CALL NOTICE NO. WML: TENDER: / 008/2011 Dated : 26.08.2011
Webel Mediatronics Limited intends to dispose the following types of VHF Antennae. Sealed tenders are invited from interested persons/agencies within 06.09.2011.
1) YAGI Antenna: Gain 12 dB, Frequency 164-173 MHz
2) YAGI Antennae : Gain 10 dB, Frequency 146-152 MHz
Total 25 (Twenty five) nos antennae will be disposed.
Interested parties may visit our office at P-1 Taratala Road, Kolkata – 700 088 for the purpose of assessment.
Dy General Manager (Dev)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO. 2401 4081
E-mail : webelmedia@gmail.com
TENDER CALL NOTICE NO. WML: Purchase / 003 / 2011 dated 16.03.2011
Sealed tenders in duplicate are invited from Dealer registered with Commercial Tax Authority for supply of following materials as detailed below :-
|
Description of Work |
Qty |
Last date & time of receipt of tender |
Date & time of opening of tender |
|
Fixing and wiring of recess mounted LED fixture after dismantling and assembly of existing Fluorescent lights with all the consumable and other attachment at the designated position inside the building as applicable. The work includes the following: i) Transportation of entire fixture from your work to the designated position, unloading and stacking of all fixture at your designated place. ii) Execution of work after normal office hours and on Saturdays, Sundays and holidays. iii) Dismantling of existing Fluorescent light thereafter doing necessary modification on the fixture for the suitability with the LED Lamps and refixing of the same in its original position. iv) Return of existing fluorescent lights at your designated position. |
400 |
Up to 1.00 PM on dt. 21.03.2011 |
At 3.00 PM on dt. 21.03.2011 |
- All material and consumable required for the job will be on Vendor’s account.
- Completion of Job :- Within 7 days of placement of Purchase Order.
- Payment Terms : 30 days Credit preferred after 100% completion of job.
- Tenders complete in all respect may please be submitted by 1.00 PM on 21st March, 2011 to The Asst. Manager (Materials). The Tender shall be opened at 3.00 PM on 21st March, 2011. The authorized representative of the tenderers may be present at the opening of tender.
- The Tender must be accompanied with the true copy of valid Income Tax PAN CARD, VAT Clearance Certificate, Electrical Contract Licence, PF/ESI registration etc. failing which the tender will be rejected.
Asst. Manager (Materials)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO. 2401 4081
E-mail : webelmedia@gmail.com
TENDER CALL NOTICE NO. WML: Marketing / 004 / 2011 dated 16.03.2011
ENGAGEMENT OF MARKETING ASSOCIATES
In order to extend its marketing reach all over India for the following products the company wishes to engage Marketing Agents on a non-exclusive basis :-
Community Radio System (CRS) : CRS is a 50W/100W FM Radio Stations catering to an area of around 10-15 km radius for the purpose of Education, Empowerment, Health Awareness, Disaster mitigation etc. For more detail please browse through the respective section in the website www.webelmediatronics.in
Area Traffic Control System (ATCS) : ATCS is an intelligent traffic signal control system that use data for vehicle detector and optimize traffic signals setting in an area to reduce vehicle delays and stops. ATCS comes with a host of features. For more detail please browse through the respective section in the website www.webelmediatronics.in
LED Lights : Retrofit of office lighting system to commercial organization and street lights are the target segments. Energy efficient quality lights with high Colour Rendering Index (CRI) and better lumen per watt is offered. Products come with 3 years warranty having a life of 50000 hours. Return on Investment (ROI) is 2.5 years. Company is looking for major projects in commercial complex, hotels, large hospitals, Govt. agencies, Highways and housing complexes.
OFC Jumpers / Connectors : The company is setting up assembly infrastructure for Optical Fibre Cable (OFC) / Jumpers / Connectors such as Single mode Optical Fibre Jumpers (Patch cords and Pigtails) (Type-I to Type-IV), Adapters (Type-I to Type-IV), Hybrid Jumpers (Type-I to Type VI) and Hybrid Adapters (Type-I to Type-VI). These are used for terminations, connecting the Optical Line Systems to outdoor / indoor optical fibre cables and other optical measurement purposes. Major users of this product are the telecom operators such BSNL, MTNL, Airtel, Vodafone etc.
Disability Related Products & Services : In order to bring benefits of IT technology to disability sector, WML is working in the area of education technology for people with disabilities for last 15 years. Efforts of WML have been recognized by Govt. of India, NASSCOM and others through national level awards several times for indigenous development of software and assistive devices specific to needs of Indian disabled fraternity. Hence the products are proprietary in nature. Products include Braille Transcription System in Indian languages, Electronic Tactile Reader, Math Braille Software, etc. for visually impaired and Voice Output Communication Aid for cerebral palsy affected and Sign language content/ multimedia teaching aid for hearing impaired students.
Established companies / Individual having proven credentials for undertaking the marketing on a Major Customer Zonal / National basis may apply by 4TH April, 2011
The General Manager
Webel Mediatronics Limited
(A Govt. of West Bengal Undertaking)
P-1, Taratala Road, Kolkata – 700 088
West Bengal, India
PH: +91-33-2401 5602, 2401 7699
FAX: +91-33-2401 4081
E-Mail: wml.response@gmail.com
Visit us @ http://www.webelmediatronics.in
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO 24014081
e-mail: webelmedia@gmail.com
TENDER CALL NOTICE NO. WML: Purchase / 005 / 2011 dated 18.03.2011
Sealed tenders in duplicate are invited from Dealers registered with Commercial Tax Authority for the following jobs as detailed below:-
|
Description of Job |
Qty |
Last Date & time of receipt of tender |
Date of time of opening of tender |
|
Development & Prototyping of CAN Bus Interface for Urban Traffic Control System. (The system consists of CPU card, Lamp driver card. The Control system is based on Micro controller 89C2051, latch circuit etc. Lamp Driver cards are used to energize Traffic lights, signal timings can be set or controlled using qwerty keyboard connected to each controller). The existing Lamp Driver cards will be replaced by the CAN Interface Card, which should cater to 32 channels. The scope of work includes the following tasks:- (a) Design of CAN interface hardware, firmware design of relevant board on C8051F060 Microcontroller. [The controller will scan Lamp Driver data periodically & transfer the data serially over CAN Bus following a suitable protocol to a standard Node controller].
(b) PCB Design, fabrication of a prototype & Testing of the new hardware with UTCS. |
Lot |
Up to 1.00 PM on dt. 25.03.2011 |
At 3.00 P.M. on dt. 25.03.2011 |
-
Delivery: Within 60 days from the date of valid purchase order.
- Consignee: Development Dept. Webel Mediatronics Limited, P-1 Taratala Road, Kolkata 700088, West Bengal, India. Contact Person: DGM (Development)
- Payment Terms: (a) 50% of total amount may be released on acceptance of hardware design & validation of Firmware by Development Dept. of WML. (b) Balance amount may be paid on successful completion of Lab testing & field trial. The complete documentation on Design (circuit diagram, bill of material, PCB art work, firmware source code etc) is to be submitted to WML.
- Tenders complete in all respect may please be submitted by 1.00 PM on or before 25th March 2011 to DGM (Dev.). The Tender shall be opened at 3.00 PM on 25th March 2011. The authorized representative of the tenders may be present at the opening of tender.
- The Tender must be accompanied with the true copy of valid Income Tax PAN CARD, VAT / CST Clearance Certificate failing which the tender will be rejected.
- If the date of sales, receipt of opening of tender happens to be a holiday, the next working day will be the corresponding effective date.
- Non Disclosure agreement: The design of the CAN controller shall be a sole property of WML. No part of the design should be shared or disclosed to any third party. A qualified Bidder should be liable to sign an agreement in this regard with WML.
DGM (Development)
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO. 2401 4081
E-mail : webelmedia@gmail.com
Offer from competent parties is required immediately for following
PEST CONTROL jobs within one week : -
|
Sl No. |
Location |
No of Service in a month |
Rate per Service (Rs) |
Amount (Rs) |
|
01. |
Room No. 3-12 to 3-22, 3-01 & 3-03, B-03, 3-09 & 3-11, 1-09 and 1-02 at P-1, Taratala Road, Kolkata – 700 088 |
02 (Two) |
|
|
|
|
|
|||
Terms and Conditions: -
1. Service : 2nd & 4th Fridays at 6.00 P.M. in a month.
2. Area : Room No. 3-12 to 3-22: 4695 Sq.Ft (3rd Floor), Room No. 3-01 & 3-03: 870
Sq. Ft. (3rd Floor), Room No. B-03: 3572 Sq.Ft
(Basement Floor), Room No. 3-09 & 3-11: 1335 Sq.Ft (3rd Floor),
Room No. 1-09 : 430 Sq.Ft (1st Floor) and Room No 1-02 : 450 Sq.
Ft (1st Floor) = Total : 11352 Sq. Ft
3. Price : Inclusive of all materials, machines, labour and supervision.
4. VAT : Inclusive.
5. Payment : Within 30 days from the date of submission of bill(s) supported by
performance certificate.
6. Validity : One year.
7. Service Tax : If applicable, shall be recovered from bill(s).
8. Jurisdiction of Court : Within the city of Kolkata
WEBEL MEDIATRONICS LIMITED
P-1 TARATALA ROAD
KOLKATA 700088, WEST BENGAL, INDIA
TEL NO. 033-24017699 / 24015602, FAX NO. 2401 4081
E-mail : webelmedia@gmail.com
Quotations are invited from interested parties within 10 days from the date of publication of this advertisement to supply the following item :-
|
Sl. No. |
Description |
Qty. |
Rate/Each |
Amount |
|
01. |
A/4 Size PVC Folder (Project file transparent) as per Neo P.P Office Stationery, Art No. 165) without print. (COLOUR GREY or BLUE) |
100 (One hundred) Nos. |
|
|
|
|
VAT: extra, if applicable |
|
|
|
|
|
||||
Terms and Conditions:-
Delivery : Within 7 (seven) days from the date of placing the order.
Mode of Despatch : Free of charge at our office at P-1, Taratala Road, Kolkata – 700 088.
Purchase Tax : To be recovered from the party’s bill, if applicable, at prevailing rate.
Payment : Within 01(One) month from the date of receipt of the party’s Bill in duplicate along receipted challan.